1550nm High Power CW Erbium Doped Fiber Laser For Fiber Optic Communication

Product Detail

Techwin 1.5µm High Power CW(Continuous Wave) Erbium Doped Fiber with Broadband Linewidth (<1nm) and Ultra Low Phase Noise, Ultra Low Relative Intensity Noise (RIN) 1550nm Single Mode Fiber Laser for Fiber Optic Communication

The 1.5µm CW laser is high power fiber laser, the output power of which reaches a range of 1W~100W, and has near diffraction-limited beam quality at the same time. Utilizing control system based on microprocessor, this continuous-wave fiber laser features stable performance, long service life and maintenance-free operation. Through a clear interface LCD on the front panel, working state including output power and temperature can be displayed in real-time, warning messages will be sent in a timely manner. In addition, these fiber lasers can be provided in modular package according to your requirement, suited for system integration.

Fiber optic communication is a method of transmitting information from one place to another by sending pulses of infrared fiber laser light through an optical fiber. The light is a form of carrier wave that is modulated to carry information. Optical Fiber is preferred over electrical cabling when high banwidth, long distance, or immunity to electromagnetic interference is required.This type of communication can transmit voice, video, and telemetry through local area networks or across long distances. Optical fiber is used by many telecommunications companies to transmit telephone signals, Internet communication, and cable television signals. Researchers at bell Labs have reached a record bandwidth-distance product of over 100 petabit × kilometers per second using fiber-optic communication.

Features

High output power
Excellent beam quality
Stable power, reliable performance
All-fiber structure design
Single-mode output, polarization-maintaining (PM) is optional

Applications

LiDAR
Remote sensing
Testing and measuring
Pump source
Scientific research
Fiber-optic communication
Free space communication

1532nm High Power CW Fiber Laser (1-30W)

This 1532nm high power CW fiber laser adopts integrated design of all-fiber structure. The output power of fiber laser can reach 30W, and realize near single mode beam quality with spectral width below 1nm.

Specifications:

Parameter	Unit	Specification
Parameter	Unit	Min	Typ.	Max
Part no.		CKLS-1532-B/M-HP
Center wavelength	nm	-	1532	-
Output power¹	W	1		30
Output power adjustable range	%	10	-	100
Spectral width² (FWHM)	nm	-	1	-
Side-mode Suppression Ratio (SMSR)	dB	35	-	-
Beam quality	M²	-	-	1.3
Operation mode		CW
Polarization		Random (Linear Polarization Optional)
Output power stability (15mins)³	%	-	±0.5	±1.0
Output power stability (8hrs)³	%	-	±1	±2
Return Loss	dB	40	-	-
Operating temperature (Module)	℃	-30	-	70
Operating temperature (Benchtop)	℃	0	-	30
Storage temperature	℃	10	-	50
Operating voltage (Module)	V_DC	12	-	24
Operating voltage (Benchtop)	V_AC	100	-	240
Output fiber type⁴		LMA Fiber
Output fiber length	m	>1
Optical connector		FC/APC (other options available)
Dimension	mm	175(L)×130(W)×29(H) (Module)510(L)X480(W)X150(H) (Benchtop)

·Output power is optional with the typical output power of 1W and 30W. · Spectral width on request. · The output power stability is measured under 25℃ after 30 minutes' warm-up. · Polarization-maintaining fiber is optional. Ordering Information: · CKLS-1532-<P>-HP-<PW>-<SP> · P: B-Benchtop, M-Module · PW: Output power in W, 1-1W, 30-30W · SP：Output isolation , 1-Yes，0-None

Inquiry

1550nm High Power CW Fiber Laser (1-100W)

This CW fiber laser is high power fiber laser, the output power of which can reach range of 1-100W.

Specifications:

Parameter	Unit	Specification
Parameter	Unit	Min	Typ.	Max
Part no.		CKLS-1550-B-HP
Center wavelength	nm	-	1550	-
Output power¹	W	1	-	100
Output power adjustable range	%	10	-	100
Spectral width² (FWHM)	nm	-	-	1
Side-mode Suppression Ratio (SMSR)	dB	35	-	-
Beam quality	M²	1.1	1.3	1.5
Operation mode		CW
Polarization		Random (Linear Polarization Optional)
Output power stability (15mins)³	%	-	±0.5	±1.0
Output power stability (8hrs)³	%	-	±1	±2
Output isolation	dB	35	-	-
Return Loss	dB	40	-	-
Operating temperature	℃	0	-	30
Storage temperature	℃	-40	-	85
Operating voltage	V_AC	100	220	240
Output fiber type⁴		LMA Fiber
Output fiber length	m	> 1
Optical connector		FC/APC (other options available)
Dimension	mm	510x480x150

· Output power is optional with the typical output power of 0.2W, 1W, 15W, 50W and 100W, etc. · Spectral width on request. · The output power stability is measured under 25℃ after 30 minutes' warm-up. · Polarization-maintaining fiber is optional. Ordering Information: · CKLS-1550-B-HP-<PW>-<SP> · B: Benchtop · PW: Output power in W, 15-15W, 100-100W · SP：Output isolation , 1-Yes，0-None

Inquiry

Techwin is known as an expert company in developing and manufacturing of fiber lasers, fiber amplifiers and fiber sources. We also strive to provide our customers with custom fiber laser solutions suited for your applications. All of our high-power fiber lasers and amplifiers are manufactured following a rigorous quality management system. We are more than happy to share our laser technology with worldwide customers, and committed to earn the ongoing trust of our customers with our industrial fiber lasers coupled with expert support and service in various industrial segments.

Product Tags

1550 nm laser